|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TPC8208 TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (U-MOSIII) TPC8208 Lithium Ion Battery Applications Notebook PC Applications Portable Equipment Applications * * * * * Small footprint due to small and thin package Low drain-source ON resistance: RDS (ON) = 38 m (typ.) High forward transfer admittance: |Yfs| = 6.3 S (typ.) Low leakage current: IDSS = 10 A (max) (VDS = 20 V) Enhancement-mode: Vth = 0.5 to 1.2 V (VDS = 10 V, ID = 200 A) Unit: mm Maximum Ratings (Ta = 25C) Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 kW) Gate-source voltage Drain current Drain power dissipation (t = 10 s) (Note 2a) Drain power dissipation (t = 10 s) (Note 2b) DC Pulse (Note 1) (Note 1) Symbol VDSS VDGR VGSS ID IDP PD (1) PD (2) PD (1) PD (2) EAS IAR EAR Tch Tstg Rating 20 20 12 5 20 1.5 W 1.1 Unit V V V A JEDEC JEITA TOSHIBA 2-6J1E Single-device operation (Note 3a) Single-device value at dual operation (Note 3b) Single-device operation (Note 3a) Single-device value at dual operation (Note 3b) Weight: 0.080 g (typ.) 0.75 W 0.45 Circuit Configuration 8 7 6 5 Single pulse avalanche energy (Note 4) Avalanche current Repetitive avalanche energy Single-device value at dual operation (Note 2a, 3b, 5) Channel temperature Storage temperature range 16.3 5 0.1 150 -55 to 150 mJ A mJ C C 1 2 3 4 Note: For (Note 1), (Note 2), (Note 3), (Note 4) and (Note 5), please refer to the next page. This transistor is an electrostatic sensitive device. Please handle with caution. 1 2003-02-18 TPC8208 Thermal Characteristics Characteristics Single-device operation (Note 3a) Symbol Rth (ch-a) (1) Rth (ch-a) (2) Rth (ch-a) (1) Rth (ch-a) (2) Max 83.3 C/W 114 Unit Thermal resistance, channel to ambient (t = 10 s) (Note 2a) Single-device value at dual operation (Note 3b) Single-device operation (Note 3a) 167 C/W 278 Thermal resistance, channel to ambient (t = 10 s) (Note 2b) Single-device value at dual operation (Note 3b) Marking (Note 6) TPC8208 Type Lot No. Note 1: Please use devices on condition that the channel temperature is below 150C. Note 2: a) Device mounted on a glass-epoxy board (a) FR-4 25.4 25.4 0.8 (unit: mm) b) Device mounted on a glass-epoxy board (b) FR-4 25.4 25.4 0.8 (unit: mm) (a) (b) Note 3: a) b) The power dissipation and thermal resistance values are shown for a single device. (During single-device operation, power is only applied to one device.) The power dissipation and thermal resistance values are shown for a single device. (During dual operation, power is evenly applied to both devices.) Note 4: VDD = 16 V, Tch = 25C (initial), L = 0.5 mH, RG = 25 W, IAR = 5 A Note 5: Repetitive rating; pulse width limited by maximum channel temperature Note 6: * on lower left of the marking indicates Pin 1. Weekly code: (Three digits) Week of manufacture (01 for first week of year, continues up to 52 or 53) Year of manufacture (One low-order digits of calendar year) 2 2003-02-18 TPC8208 Electrical Characteristics (Ta = 25C) Characteristics Gate leakage current Drain cut-OFF current Drain-source breakdown voltage Gate threshold voltage Symbol IGSS IDSS V (BR) DSS V (BR) DSX Vth Test Condition VGS = 10 V, VDS = 0 V VDS = 20 V, VGS = 0 V ID = 10 mA, VGS = 0 V ID = 10 mA, VGS = -12 V VDS = 10 V, ID = 200 mA VGS = 2.0 V, ID = 2.5 A Drain-source ON resistance RDS (ON) VGS = 2.5 V, ID = 2.5 A VGS = 4.0 V, ID = 2.5 A Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Turn-ON time Switching time Fall time Turn-OFF time Total gate charge (gate-source plus gate-drain) Gate-source charge 1 Gate-drain ("miller") charge tf toff Qg Qgs1 Qgd VDD ~ 16 V, VGS = 5 V, ID = 5 A |Yfs| Ciss Crss Coss tr ton VGS 5 V 0V 4.7 W ID = 2.5 A VOUT RL = 4 W VDS = 10 V, VGS = 0 V, f = 1 MHz VDS = 10 V, ID = 2.5 A Min 3/4 3/4 20 8 0.5 3/4 3/4 3/4 3.2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Typ. 3/4 3/4 3/4 3/4 3/4 57 46 38 6.3 780 90 100 5.0 12 2.7 21 9.5 2.0 2.2 Max 10 10 3/4 3/4 1.2 100 70 50 3/4 3/4 3/4 3/4 3/4 3/4 ns 3/4 3/4 3/4 3/4 3/4 nC pF S mW Unit mA mA V V Duty < 1%, tw = 10 ms = VDD ~ 10 V - Source-Drain Ratings and Characteristics (Ta = 25C) Characteristics Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol IDRP VDSF Test Condition 3/4 IDR = 5 A, VGS = 0 V Min 3/4 3/4 Typ. 3/4 3/4 Max 20 -1.2 Unit A V 3 2003-02-18 TPC8208 ID - VDS 10 4 8 3 1.7 6 1.6 4 1.5 2 VGS = 1.4 V 0 0 0 0 10 20 2 1.9 2.5 1.8 Common source Ta = 25C Pulse test Common source ID - VDS 10 5 2.6 4 3 2.4 16 Ta = 25C (A) (A) Pulse test 2.2 12 2.0 8 1.8 4 1.6 VGS = 1.4 V ID Drain current Drain current ID 0.2 0.4 0.6 0.8 1 0.4 0.8 1.2 1.6 2.0 Drain-source voltage VDS (V) Drain-source voltage VDS (V) ID - VGS 10 Common source VDS = 10 V Pulse test 1.0 VDS - VGS Common source Ta = 25C Pulse test (V) VDS Drain-source voltage 8 0.8 ID (A) 6 0.6 Drain current 4 25 2 Ta = -55C 0 0 0.5 1 1.5 2 2.5 100 0.4 2.5 0.2 1.2 0 0 2 4 6 8 10 12 ID = 5 A Gate-source voltage VGS (V) Gate-source voltage VGS (V) |Yfs| - ID 100 Common source VDS = 10 V Pulse test 1000 RDS (ON) - ID Common source Ta = 25C Pulse test iYfsi (S) Forward transfer admittance 10 25 Ta = -55C Drain-source ON resistance RDS (ON) (mW) 100 VGS = 2.5 V 4 100 1 10 0.1 0.1 1 10 30 1 0.1 1 10 100 Drain current ID (A) Drain current ID (A) 4 2003-02-18 TPC8208 RDS (ON) - Ta 100 Common source 80 Pulse test 100 IDR - VDS Drain-source ON resistance RDS (ON) (mW) Drain reverse current IDR (A) 60 VGS = 2.5 V 40 4V 20 ID = 5 A 10 5 3 1 VGS = 0 V 2.5 A, 1.2 A ID = 5 A, .2.5 A, 1.2A 1 0 -80 -40 0 40 80 120 160 0.1 -0 Common source Ta = 25C Pulse test -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 Ambient temperature Ta (C) Drain-source voltage VDS (V) Capacitance - VDS 10000 1.4 1.2 1.0 0.8 0.6 0.4 0.2 Vth - Ta Common source VDS = 10 V ID = 1 mA Pulse test 1000 Ciss 100 Coss Crss Common source Ta = 25C VGS = 0 V f = 1 MHz 1 10 100 Gate threshold voltage Vth (V) Capacitance C (pF) 10 0.1 0 -80 -40 0 40 80 120 160 Ambient temperature Ta (C) Drain-source voltage VDS (V) PD - Ta 2.0 Device mounted on a glass-epoxy board (a) (Note 2a) (1) Single-device operation (Note 3a) (2) Single-device value at dual operation (Note 3b) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Single-device operation (Note 3a) (4) Single-device value at dual operation (Note 3b) t = 10 s Dynamic input/output characteristics 20 Common source VDD = 16 V VDS 12 8 4 8 VDD = 16 V 4 4 4 ID = 5 A Ta = 25C Pulse test 12 16 20 (W) (V) PD VDS Drain power dissipation Drain-source voltage 1.0 (3) 8 8 0.5 (4) 0 0 50 100 150 200 0 0 5 10 15 0 20 Ambient temperature Ta (C) Total gate charge Qg (nC) 5 2003-02-18 Gate-source voltage (2) VGS 1.5 (1) 16 (V) TPC8208 rth - tw 1000 Single pulse (4) (3) (2) (1) 100 Normalized transient thermal impedance rth (C/W) 10 1 Device mounted on a glass-epoxy board (a) (Note 2a) (1) Single-device operation (Note 3a) (2) Single-device value at dual operation (Note 3b) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Single-device operation (Note 3a) (4) Single-device value at dual operation (Note 3b) t = 10 s 0.1 0.001 0.01 0.1 1 10 100 1000 Pulse width tw (S) Safe operating area 100 50 30 ID max (pulse) * 10 Single-device value at dual operation (Note 3b) 1 ms * 10 ms * (A) Drain current ID 5 3 1 0.5 0.3 0.1 * Single pulse 0.05 Ta = 25C 0.03 Curves must be derated linearly with increase in temperature. 0.01 0.01 0.03 0.1 0.3 1 VDSS max 3 10 30 100 Drain-source voltage VDS (V) 6 2003-02-18 TPC8208 RESTRICTIONS ON PRODUCT USE 000707EAA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 7 2003-02-18 |
Price & Availability of TPC8208 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |